This resource can not be previewed at the moment. Click here for more information.

Download resource

Additional Information

Field Value
Last updated Dec 09, 2013
Created Dec 09, 2013
Format text/csv
License Open Data Commons Attribution License
can be previewed1
createdDecember 9, 2013
datastore active1
instrumentCampbell scientific 107 temperature probe and CR1000 datalogger
instrument.calibrationDetails+/- 0.3 degrees C
instrument.measurementDomainAndUnitsTemperature in degrees centigrade
instrumentIDDDCF: dataloggers: E3838 and E2278,DDPF: datalogger: E2279, HHQF: dataloggers: E1834 and E1840, HHCC: datalogger: E1835
last modifiedDecember 9, 2013
license idodc-by
on same domain1
resource group id9d6a626f-827a-416b-ad8e-5ef3a945cb68
resource.abstractProcessed temperature data
resource.bibliographicCitation@data{dart_tmp_hhqf_2011_2013_pro_n.csv, doi = {not allocated}, url = {}, author = "{Dan Boddice}", publisher = {DART repository, School of Computing, University of Leeds}, title = {dart_tmp_hhqf_2011_2013_pro_n.csv}, year = {2013}, note = {DART is a Science and Heritage project funded by AHRC and EPSRC. Further DART data and details can be found at} }
resource.completenessComplete with some gaps due to datalogging issues early on
resource.consistencyConsistent data structure, attribution and relationships.
resource.creator.nameDan Boddice
resource.custodian.nameAnthony Beck
resource.descriptionSoil Temperature data, recorded every 30 minutes, were collected using thermal probes, over a depth of approximately 1m. The probes were installed between May and August 2011. Readings were taken until the boxes either flooded (Autumn 2012 HHQF, HHCC, DDCF) or were removed from the ground (June 2013). The temperature probes were placed, wherever possible, alongside the TDR probes. The location of each probe can be found on the section drawings in the excavation collection. The large number of probes in the 'heavy' soils required the use of two multiplexors which meant that two data files were created for each site (given the suffix A (where all the probes were installed in the archaeology) and N (where all the probes were installed in the 'natural'). The probes in the well draining soils were given the suffix B to refer to installation in 'Both' archaeology and 'natural'. The exact locations for the probes are as follows: DDCF: DDPF: HHQF: HHCC: The probes measure resistive change and convert this into temperature using the Steinhart and Hart equation The aim is to provide a better understanding of when contrast between archaeological features and the surrounding soil matrix occurs and what causes this contrast in order to optimise geophysical surveys. SPECIFIC INFORMATION ON TEMPERATURE PROBES AND SETTINGS Soil temperature data at different depths was measured using Campbell Scientific 107-L thermal probes with 5m of cable in half bridge circuit. The 107 is a rugged, accurate probe that measures temperature of air, soil, or water from -35 degree to +50 degree C. It easily interfaces with most Campbell Scientific dataloggers and can be used in a variety of applications. The 107 consists of a thermistor encapsulated in an epoxy-filled aluminum housing. The housing protects the thermistor allowing the probe to be buried in soil or submerged in water. The 107 is suitable for shallow burial only. Placement of the cable inside a rugged conduit may be advisable for long cable runs especially in locations subject to digging, mowing, traffic, use of power tools, or lightning strikes. Campbell Scientific 107-L thermal probe technical information. Sensor: BetaTherm 100K6A1B Thermistor. Tolerance: +/-0.2 degree C over 0 degree to 50 degree C range. Temperature Measurement Range: -35 degree to +50 degree C. Steinhart-Hart Equation Error (CRBasic dataloggers only):less than +/-0.01 degree C over measurement range. Time Constant in Air: 30 to 60 s in a wind speed of 5 m s-1. Maximum Submersion Depth: 15.24 m (50 ft). Probe Length: 10.4 cm (4.1 in.). Probe Diameter: 0.762 cm (0.3 in.). Weight with 10-ft cable: 136 g (5 oz). Collected with CR1000 datalogger. CR1000 Specifications. Maximum Scan Rate: 100 Hz. Analog Inputs: 16 single-ended or 8 differential individually configured. Pulse Counters: 2. Switched Excitation Channels: 3 voltage. Digital Ports: 8 I/Os or 4 RS-232 COM. Communications/Data Storage Ports: 1 CS I/O, 1 RS-232, 1 parallel peripheral. Switched 12 Volt: 1. Input Voltage Range: +/-5 Vdc. Analog Voltage Accuracy: +/-(0.06 percent of reading + offset), 0 degree to 40 degree C. Analog Resolution: 0.33 microV. A/D Bits: 13. Temperature Range: Standard: -25 degree to +50 degree C Extended: -55 degree to +85 degree C. Memory: 2 MB Flash (operating system), 4 MB (CPU usage, program storage, and data storage). Power Requirements: 9.6 to 16 Vdc. Current Drain: 0.7 mA typical; 0.9 mA max. (sleep mode) 1 to 16 mA typical (w/o RS-232 communication) 17 to 28 mA typical (w/RS-232 communication). Dimensions: 23.9 x 10.2 x 6.1 cm (9.4" x 4.0" x 2.4"). Dimensions with CFM100 or NL115 attached: 25.2 x 10.2 x 7.1 cm (9.9" x 4.0" x 2.8"). Weight: 1.0 kg (2.1 lb). Protocols Supported: PakBus, Modbus, DNP3, FTP, HTTP, XML, POP3, SMTP, Telnet, NTCIP, NTP, SDI-12, SDM. CE Compliance Standards to which Conformity is Declared: IEC61326:2002. Warranty: 3 years. The CFM100 stores the datalogger's data on a removable CompactFlash (CF) card. The CFM100/CF card combination can be used to expand the datalogger's memory, transport data/programs from the field site(s) to the office, and upload power up functions. The module connects to the 40-pin peripheral port on a CR1000 or CR3000 datalogger. Technical Description: The CFM100 includes a card slot that can fit one Type I or Type II CF card. Only industrial-grade CF cards should be used with our products. Although consumer-grade cards cost less than industrial-grade cards, the consumer-grade cards are more susceptible to failure resulting in both the loss of the card and its stored data. Industrial-grade cards also function over wider temperature ranges and have longer life spans than consumer-grade cards. Data stored on the card can be retrieved either by removing the card and carrying it to a computer or through a communications link with the datalogger. The computer can read the CF card either with the computer's PCMCIA slot and the CF1 adapter or the computer's USB port and the 17752 Reader/Writer. CFM100 Specifications: Typical Access Speed: 200 to 400 kbits s-1. Memory Configuration: User selectable; ring (default) or fill-and-stop. Power Requirements: 12 V supplied through the datalogger's peripheral port. CF Card Requirements: Industrial-grade; storage capacity of 2 GB or less. Dimensions: 10.0 x 8.3 x 6.5 cm (4.0" x 3.3" x 2.6"). Dimensions of CR1000 with CFM100 attached: 25.2 x 10.2 x 7.1 cm (9.9" x 4.0" x 2.8"). Weight: 133 g (4.7 oz). Typical current drain: RS-232 Port Active Writing to Card: 30 mA Reading Card: 20 mA RS-232 Port Not Active Writing to Card: 20 mA Reading Card: 15 mA. Low Power Standby: 700 to 800 microA.
resource.distribution.techniqueDownload only
resource.funderScience and Heritage Programme, Arts and Humanities Research Council, Engineering and Physical Sciences Research Council
resource.keywordsSoil, Temperature, Probe, Monitoring
resource.lineageNone: this is raw data
resource.metadata.creator.nameDan Boddice
resource.processingStepsConversion from binary format using CardConvert producing a file containing datestamps and temperature readings. Scripted to rearrange into current format.
resource.publisherSchool of Computing, University of Leeds
resource.purposemulti-temporal heritage detection
resource.reuseConstraintsNo conditions apply for reuse (remix it, publish it, share it, commercialise it, sell it etc.) except attribution (see resource.bibliographicCitation)
resource.reusePotentialarchaeology, environment, heritage, soil science, farming, ecology, geography, earth science
resource.samplingStrategyProbes were installed in a known natural profile, denoted by the suffix N. Data are recorded every 60 minutes.
resource.topicgeoscientificInformation, environment, heritage, farming, climatology/Meteorology/Atmosphere, imageryBaseMapsEarthCover, society, structure
resource.updateFrequencynot planned
revision idd937f4f1-7fd2-473a-9880-b32a83254bae
revision timestampDecember 9, 2013
size30.5 MiB
spatial{ "type": "Polygon", "coordinates": [ [ [-1.907587, 51.706954],[-1.89939, 51.706954], [-1.89939, 51.703178], [-1.907587, 51.703178], [-1.907587, 51.706954] ] ] }
spatial-textUnited Kingdom
spatial.driftGeologyno superficial drift geology
spatial.polygon.OSGB36{ "type": "Polygon", "coordinates": [ [ [406483, 200918],[407049, 200918], [407049, 200497], [406483, 200497], [406483, 200918] ] ] }
spatial.polygon.WGS84{ "type": "Polygon", "coordinates": [ [ [-1.907587, 51.706954],[-1.89939, 51.706954], [-1.89939, 51.703178], [-1.907587, 51.703178], [-1.907587, 51.706954] ] ] }
title.patternWhere appropriate each resource has been named with the following pattern: DART_<3 character sensor/collection name>_<spatial location>_<StartDateTime YYYYMMDD with optional HHMM>_<endDateTime YYYYMMDD with optional HHMM>_<stage PRO or RAW to refer to processed or raw data>_<other stuff>.<suffix>. Hence, the file DART_T3P_DDCF_20110823_20130106_PRO.csv refers to DART data collected using the T3P Imko soil moisture probes at Diddington Clay Field between 23rd August 2011 and 6th January 2013 which has been processed and is available in a comma separated text format.
webstore last updatedDecember 9, 2013
webstore urlactive